IGP-HWFclassic 591TU-R1
Super-durable, effect containing coating powder for fine- textured surfaces, produced with IGP-Effectives® technology for unbeaten material efficiency.
download PDFCharacteristics
- Deep matte
- Fine texture
- IGP-Effectives®
- Super durable façade quality, 3 years Florida > 50% residual gloss
- more robust & pliable
Material approvals
- Qualicoat Nr. P-1173, class 2
Powder properties
Film properties
Processing
The substrate must be free from oil, grease and oxidation products. The pretreatment depends on the type of substrate and the corrosion protection to be achieved. We recommend the following pretreatments:
- Chromating according to DIN EN 12487
- Pre-anodization
- Chrome-free pretreatment according to GSB International and QUALICOAT specifications
- Zinc phosphating
- Zinc phosphating
- Chrome (III) passivation
- Chromating according to DIN EN 12487
For improved corrosion protection for applications on steel / galvanized steel, the use of corrosion protection primer IGP-KORROPRIMER 10 or IGP-KORROPRIMER 60 is recommended. The suitability of the pretreatment method used is generally to be tested by the coater in advance with appropriate test methods. The minimum requirement for aluminum substrates / galvanized steel components is to carry out a boiling water test with a subsequent cross-cut adhesion and tape test. We refer to the guidelines of the GSB International, Qualicoat and Qualisteelcoat certifications. For further information: see also our special leaflet on pre-treatment (IGP-TI 100).
TObject | t min | t max |
---|---|---|
338 °F | 20 minutes | 30 minutes |
356 °F | 15 minutes | 25 minutes |
374 °F | 10 minutes | 20 minutes |
More information
Consult the Safety Data Sheet prior to use.