IGP-HWFsuperior 571TA-R1
Deep matt powder coating with a fine texture and outstanding weathering stability, based on saturated polyester and a declaration-free hardener.
download PDFCharacteristics
- Deep matte
- Fine texture
- Uni colors
- Super durable facade quality,
5 years Florida > 50% residual gloss - more robust & pliable
Material approvals
- GSB 173 f - Florida 5
- Qualicoat Nr. P-1856, class 2
- AAMA 2604-13, independent test report
Powder properties
Film properties
Processing
The substrate must be free from oil, grease and oxidation products. The pretreatment depends on the type of substrate and the corrosion protection to be achieved. We recommend the following pretreatments:
- Chromating according to DIN EN 12487
- Pre-anodization
- Chrome-free pretreatment according to GSB International and QUALICOAT specifications
- Zinc phosphating
- Zinc phosphating
- Chrome (III) passivation
- Chromating according to DIN EN 12487
For improved corrosion protection for applications on steel / galvanized steel, the use of corrosion protection primer IGP-KORROPRIMER 10 or IGP-KORROPRIMER 60 is recommended. The suitability of the pretreatment method used is generally to be tested by the coater in advance with appropriate test methods. The minimum requirement for aluminum substrates / galvanized steel components is to carry out a boiling water test with a subsequent cross-cut adhesion and tape test. We refer to the guidelines of the GSB International, Qualicoat and Qualisteelcoat certifications. For further information: see also our special leaflet on pre-treatment (IGP-TI 100).
TObject | t min | t max |
---|---|---|
338 °F | 20 minutes | 30 minutes |
356 °F | 15 minutes | 25 minutes |
374 °F | 10 minutes | 20 minutes |
More information
Consult the Safety Data Sheet prior to use.