IGP-DURA®sky 9503A-A7
Ultra-resistant powder coating for the durable finishing of high-quality objects with the highest resistance to climatic, mechanical and chemical influences.
download PDFCharacteristics
- Matte
- Smooth finish
- Uni colors
- Ultra super durable façade quality, 10 years Florida
Material approvals
- Qualicoat Nr. P-1967, LIGHT, class 3
- Qualicoat Nr. P-1968, MEDIUM, class 3
- Qualicoat Nr. P-1969, DARK, class 3
- AAMA 2605-20, independent test report
Powder properties
Film properties
Processing
The substrate must be free from oil, grease and oxidation products. The pretreatment depends on the type of substrate and the corrosion protection to be achieved. We recommend the following pretreatments:
- Chromating according to DIN EN 12487
- Pre-anodization
- Chrome-free pretreatment according to GSB International and QUALICOAT specifications
- Zinc phosphating
- Zinc phosphating
- Chrome (III) passivation
- Chromating according to DIN EN 12487
For white and light IGP-DURA®sky qualities, the use of IGP-KORROPRIMER 6007A90104A00 is recommended.
For improved corrosion protection for applications on steel / galvanized steel, the use of corrosion protection primer IGP-KORROPRIMER 60 is recommended. The suitability of the pretreatment method used is generally to be tested by the coater in advance with appropriate test methods. The minimum requirement for aluminum substrates / galvanized steel components is to carry out a boiling water test with a subsequent cross-cut adhesion and tape test. We refer to the guidelines of the GSB International, Qualicoat and Qualisteelcoat certifications. For further information: see also our special leaflet on pre-treatment (IGP-TI 100).
TObject | t min | t max |
---|---|---|
392 °F | 15 minutes | 20 minutes |
410 °F | 12 minutes | 17 minutes |
More information
Consult the Safety Data Sheet prior to use.