IGP-DURA®pol 6802A-C1
Matte, highly reactive powder coating with smooth flow and electrostatic dissipative properties (ESD).
download PDFCharacteristics
- Matte
- Smooth finish
- Uni colors
- Industrial outdoor quality
- Electric. discharging
Powder properties
Film properties
Processing
The substrate must be free from oil, grease and oxidation products. The pretreatment depends on the type of substrate and the corrosion protection to be achieved. We recommend the following pretreatments:
- Chromating according to DIN EN 12487
- Pre-anodization
- Chrome-free pretreatment according to GSB International and QUALICOAT specifications
- Zinc phosphating
- Zinc phosphating
- Chrome (III) passivation
- Chromating according to DIN EN 12487
The suitability of the pretreatment method used is generally to be tested by the coater in advance with appropriate test methods. The minimum requirement for aluminium substrates / galvanised steel components is to carry out a boiling water test with a subsequent cross-cut adhesion and tape test. We refer to the guidelines of the GSB International, Qualicoat and Qualisteelcoat certifications. For further information: see also our special leaflet on pre-treatment (IGP-TI 100).
TObject | t min | t max |
---|---|---|
320 °F | 15 minutes | 25 minutes |
338 °F | 10 minutes | 20 minutes |
356 °F | 8 minutes | 15 minutes |
More information
Consult the Safety Data Sheet prior to use.