
IGP-LivingSurfaces
A Commitment To Uniqueness
IGP has followed a trend towards "vivid" surfaces in exciting colour compositions and textures with its IGP-LivingSurfaces range. We consider "living/vivid" to refer to moving surfaces with deliberately-induced inhomogeneities in terms of pigment or effect distribution for instance, similar to two stones that originate from the same quarry.
The following product categories from the IGP-LivingSurfaces Series each represent one of the three available surface characteristics: Grain structure (fine plaster), Wave pattern, Microtexture speckles. All IGP-LivingSurfaces product groups belong to the group of highly weather-resistant powder coating qualities.
Grain Structure, plain
IGP-HWFclassic 591TA-A81
Properties
Coarsely-ground highly-weather resistant coating system, saturated polyester based with deep matt, plaster-like grain structure.
Shade range
Highly weather-resistant presentable single shades from all colour charts. Note: Shades may appear significantly lighter due to the severe light diffusion of the coarse structure.
Product advantages
- Highly weather-resistant coating product
- Good opacity
- Low minimum curing temperature
- Individual shade creation
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention. Gives objects a solid, rich appearance.
Primer
The IGP-KORROPRIMER 60 primer or a 591TA-A10 fine structure of the same shade is strongly recommended when using Article 591TA-A81 on aluminium. The IGP-KORROPRIMER 60 primer is essential when using Article 591TA-A81 on steel in order to achieve a sufficient corrosion protection.
Cleaning
When coating in according with the Technical Data Sheet and Processing Instruction, the surfaces may be cleaned using a steam jet device provided that the pressure is moderate. Preliminary tests are recommended.
Micro texture, plain speckles
IGP-HWFclassic 591TC
Properties
Saturated polyester-based highly weather-resistant structure powder with colour speckles and reduced curing conditions from 170 °C.
Shade range
Base shades with added single-shade speckles available ex-stock according to the IGP-Living Surfaces colour card.
Product advantages
- Highly weather-resistant coating product
- Flat, robust microstructure
- Good opacity
- Low minimum curing temperature
- Easy-to-clean quality
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 591TC on steel in order to achieve improved corrosion protection.
Cleaning
Conventional cleaning according to the directives of the regional associations for the cleaning of metal facades.
Micro texture, effect speckles
IGP-HWFclassic 591TV
Properties
Saturated polyester-based highly weather-resistant structure powder with speckle effect and reduced curing conditions from 170 °C.
Shade range
Base shades with added effective colour speckles available ex-stock according to the IGP-Living Surfaces colour card.
Product advantages
- Highly weather-resistant coating product
- Flat, robust microstructure
- Good opacity
- Low minimum curing temperature
- Easy-to-clean quality
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 591TV on steel in order to achieve improved corrosion protection.
Cleaning
Conventional cleaning according to the directives of the regional associations for the cleaning of metal facades.
Wave pattern, plain
IGP-HWFclassic 592SA
Properties
Highly weather-resistant structure powder with wave-like coarse structure. Saturated polyester-based product with reduced curing conditions from 170 °C.
Shade range
Highly weather-resistant presentable single shades from all colour charts.
Product advantages
- Highly weather-resistant coating product
- Coarse structure supports the visual liveliness
- Good opacity
- Low minimum curing temperature
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 592SA on steel in order to achieve improved corrosion protection.
Cleaning
Conventional cleaning according to the directives of the regional associations for the cleaning of metal facades.
Wave pattern, plain speckles
IGP-HWFclassic 592SC
Properties
Highly weather-resistant structure powder with wave-like coarse structure and colour speckle dry shake. Saturated polyester-based product with reduced curing conditions from 170 °C.
Shade range
Base shades with addition of single-shade speckles available ex-stock according to the IGP-Living Surfaces colour card.
Product advantages
- Highly weather-resistant coating product
- Coarse structure supports the visual liveliness
- Good opacity
- Low minimum curing temperature
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 592SC on steel in order to achieve improved corrosion protection.
Cleaning
Conventional cleaning according to the directives of the regional associations for the cleaning of metal facades.
Wave pattern, with effect
IGP-HWFclassic 592SE
Properties
Highly weather-resistant structure powder with wave-like coarse structure and effect additive. Saturated polyester-based product with reduced curing conditions from 170 °C.
Shade range
Base shades with effect additive available ex-stock according to the IGP-Living Surfaces colour card.
Product advantages
- Highly weather-resistant coating product
- Coarse structure supports the visual liveliness
- Good opacity
- Low minimum curing temperature
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 592SE on steel in order to achieve improved corrosion protection.
Cleaning
Conventional cleaning according to the directives of the regional associations for the cleaning of metal facades.
Grain structure, variable
IGP-HWFclassic 592SV
Properties
Highly weather-resistant structure powder with speckle effect and irregular grain structure. Saturated polyester-based product with reduced curing conditions from 170 °C.
Shade range
Base shades with added effective colour speckles available ex-stock according to the IGP-Living Surfaces colour card.
Product advantages
- Highly weather-resistant coating product
- Coarse structure supports the visual liveliness
- Good opacity
- Low minimum curing temperature
- Certified Qualicoat quality
Application
Application on metal facades and structural components in exterior environments subject to increased requirements in terms of gloss and shade retention.
Primer
The IGP-KORROPRIMER 10 primer is strongly recommended when using Article 591TV on steel in order to achieve improved corrosion protection.
Cleaning
When coating in according with the Technical Data Sheet and Processing Instruction, the surfaces may be cleaned using a steam jet device provided that the pressure is moderate. Preliminary tests are recommended.