10

IGP-KORROPRIMER 1001A-A0

10

Epoxy resin primer for best possible corrosion protection on steel.

IGP-KORROPRIMER 1001 is the modern classic based on epoxy resins and was specially developed for steel substrates. With its pronounced wetting behavior, it ensures excellent adhesion to the substrate and, thanks to its barrier effect, the highest possible corrosion protection. Also available in V-version for outgassing substrates.

  • Curing conditions
    TObjectminmax
    170 °C25 minutes30 minutes
    180 °C20 minutes25 minutes
    190 °C10 minutes15 minutes
    When curing thick steel components we recommend to gel the primer and fully cure the part with the top coat.
    To avoid intercoat adhesion problems the maximum air temperature should be limited to 210°C.
    When curing in directly heated gas ovens, a sample should be done in advance to ensure the intercoat adhesion with the following top coat.
    Please contact our technical customer support.
    In order to determine ideal curing conditions, we recommend practical trials with the respective object and curing oven.